A Portland cement-based patch and skim coat that can be installed over almost any surface to provide a smooth and permanent finish prior to the installation of floor coverings or patching holes, gouges, cracks, and seams, in subfloors such as concrete, brick, masonry, terrazzo and ceramic tile, wood, and metal, prior to the installation of any floor covering

Specially formulated with an ultra fast dry time

Dries in as little as 15 minutes

Can be installed from a feather edge to 5 In

depth

No primers or additives needed, just mix with water

mixing ratio is 2 parts powder to 1 part water (by volume)

For the entire bag, mix 1

75 quarts of water with the 7 Lb

bag

Coverage: Trowel with flat edge, 7 Lb

box covers approximately 198 Sq

Ft

at skim coat

Temperature should be above 65 deg

F

Remove dirt, wax, polish, paint, and other foreign material from floor prior to application

Mixing product with a 1/2 In

drill at a minimum 650 RPM will produce a creamier and easier-to-apply mix

If the product begins to harden in the bucket use a drill to re-whip

Will not promote the growth of mold and/or mildew

7 Lb

box