An interior/exterior, direct to metal (DTM), water-based corrosion-resistant primer and topcoat designed for industrial maintenance and construction purposes

Use on machinery, farm implements, fixtures, conveyors, safety equipment, aluminum, metal, steel, and doors

Provides maximum color and gloss retention

May also be used alone as a flat finish topcoat

Prepare surfaces by removing any loose paint, dust, rust, or dirt to ensure adhesion

Solvent clean iron and steel surfaces and prime bare steel within 8 hours before flash rusting occurs

Allow a minimum of 6 months to weather before priming

Topcoat with Do it waterborne industrial enamel or alkyd industrial enamel

Apply with synthetic brush, roller, or airless sprayer

Clean up with soap and water

Covers approximately 150 to 290 Sq

Ft

per gallon

Dries to touch 20 to 45 minutes or to recoat in 4 to 6 hours