Crown Carbide Pro Hollowing Tip Turning Tool is a versatile and high-performance turning tool designed for woodworkers and artisans. This replaceable tip tool is for cutting coves in spindle work, hollowing the interiors of bowls and vessels, and performing smooth finishing operations. It excels not only with all types of wood but also with acrylic, polyester, and resin materials. Unlike traditional turning tools that often require additional honing, the Carbide Pro tool is ready to use right out of the box, featuring a high-grade solid tungsten carbide cutter made in the USA. The cutter is crafted from advanced Nano Particle Carbide and hardened to an impressive 93 HRC, ensuring an ultra-sharp edge that lasts a long time. When the tip dulls, it can be simply rotated to reveal a fresh cutting edge, extending the tool’s usability. The tool comes equipped with a 17-inch black stained Ash handle and a sturdy 8-1/2-inch long by 0.60-inch wide Chrome Vanadium steel blade, providing a balanced heft that reduces vibration and aids in control. It is designed to work flat and level at or just below center, with slightly rounded blade edges for controlled shear cuts. The round cutting tip measures 15mm in diameter, and the overall tool length is approximately 22-1/2 inches. Included with the tool are the Carbide Cutting Tip and Screw, a Hex Wrench, and two extra mounting screws. Please note that Carbide Pro cutters are specific to their tool types and are not interchangeable between different tool models. Model Number: CARBPROR