Henry 314 Readyset premixed mastic adhesive for ceramic, porcelain, and quarry tile

Do not use for lug-back ceramic tile or pre-grouted wall tile sheets

Bonds to concrete, concrete block, cement backer board, gypsum drywall, plaster, underlayments, wood substrates, brick, and existing ceramic tile

Glossy painted surfaces and glazed ceramic tile must be abraded

Do not use over mortar beds, gang showers, or walls made of plywood or particleboard

Do not install porcelain tile over nonporus substrates

Do not install tile over gypsum backing board or water-resistant gypsum backing board (greenboard) where there will be direct exposure to water

Refer to the tile manufacturer's specific preparation recommendations

Tile at 65 deg

F

(18 deg

C

) or above

VOC content: 60 g/L: Calculated and reported, SCAQMD 1168

Ceramic and porcelain tile 6" x 6" or smaller: 5/32" x 3/16" saw tooth, 160 to 200 sq

ft

per 4 gallon

Mosaic tile: 1/8" x 1/8": Saw tooth, 180 to 220 sq

ft

per 4 gallon

Ceramic and porcelain tile larger than 6" x 6", and all quarry tile: 1/4" x 1/4" x 1/4" square notch, 100 to 120 sq

ft

per 4 gallon

Plastic pail