A (2) component (1

1 ratio), solids, high modulus, structural epoxy paste for anchoring and concrete repair

Resin and hardener are uniformly dispensed from cartridge and mixed through mixing nozzle (included) using a standard caulk gun

Formulated for anchoring threaded rods, bolts, rebar dowels, and smooth dowels into concrete, grout filled block, and unreinforced masonry

Has exceptional strength with a high-heat deflection temperature of 134 deg

F

Excellent for filling and repairing cracks in concrete and will not come loose from any cleaned concrete surface

Will hold during expansion and contraction of concrete, for permanent concrete repair

Solvent-, no odor, moisture-intensive

Working time 20 minutes at 75 deg

F

Bolt down/paint time as little as 4 hours

Can be used as adhesive on wood, metal (all types), glass, brick, block, rubber, concrete, stone, slate, fiberglass, tile, and more in any and all combinations

Tools/equipment may be cleaned with denatured alcohol, xylene, or aromatic solvents

by ICC ES Leagcy Report ER-4996, SBCCI Report No

2055, City of Los Angeles Research Report No

25265, Miami Dade Product Control: No

08-0520

10, and Florida DOT Spec 937HVozzles

250 ml

(8

6 oz

) cartridge comes with 2 nozzles